|
ES101 passive window
1. Huajian profile 2. Combination angle glue injection process 3. Micro ventilation system 4. High cost performance 5. Stepped drainage 6. Type C heat insulation plaster design 7. Mullion workmanship 8. Multi-cavity heat insulation plaster 9. Soft-hard co-extrusion isobaric rubber strip Structure width: 101mm Base material wall thickness: ≥1.5mm Wind load resistance: Level 9 Air impermeability: Level 7 Water tightness: Level 6 Heat retaining property: Level 8 Acoustical insulation: Level 10
|
1. The multi-point locking system and anti-theft lock bar and lock bracket design are adopted.
2. Optional built-in electric/manual louver glass.
3. The heat-insulating property is good due to sealing design of three rubber strips and heat insulation plaster of multi-cavity design.
4. There are many optional products with different widths/thicknesses.
5. Reinforced profile wall thickness design and good wind load resistance performance.
Material: 6063-T5 primary aluminum
Wall thickness: 1.7mm
Glass: Double glass 5+16A+5+16A+5
Hardware: Siegenia hidden hardware Great Wall Series customized handle
Rubber strip: Automotive ternary ethylene propylene rubber strip
1. Huajian profile 2. Combination angle glue injection process 3. Micro ventilation system
4. High cost performance 5. Stepped drainage 6. Type C heat insulation plaster design
7. Mullion workmanship 8. Multi-cavity heat insulation plaster 9. Soft-hard co-extrusion isobaric rubber strip
Structure width: 101mm Base material wall thickness: ≥1.5mm
Wind load resistance: Level 9 Air impermeability: Level 7 Water tightness: Level 6
Heat retaining property: Level 8 Acoustical insulation: Level 10
